STANDARD FEATURES
■ Stainless steel front, sides and front top ledge.
■ Full width front grease drawers.
■ 13" cooking height on 4" adjustable legs.
■ Heavy duty cast iron char-radiants.
■ 51⁄4" wide cast iron grates are reversible for level or inclined broiling positions.
■ One 14,500 BTU/hr. cast iron burner for each broiler grate.
■ One infinite heat control valve for each burner.
■ Standing pilot ignition system.
■ Underburner deflector system reflects heat upwards creating a 'Cool Zone' in the grease drawer and drip areas.
■ 3⁄4" rear gas connection and convertible gas pressure regulator for LP service.
■ Constructed standard for natural gas service. LP conversion kit supplied with unit.
■ One year limited parts and labor warranty.
Exterior Dimensions: 25 3/8"w x 27" d x 13" h on 4" legs.
Includes 3/4" x 48" Gas Line and Delivery in the GTA*
*Locations with special requirements (stairs, obstacles, etc.) may be subject to additional fees
STANDARD FEATURES
■ 1" thick polished steel griddle plate welded to 3 1⁄4" stainless steel back, tapered side splashes and stainless steel grease trough.
■ Fully welded stainless and aluminized steel chassis frame.
■ 121⁄2" cooking height on 4" adjustable legs.
■ One 25,000 BTU/hr. "U" shaped aluminized steel burner for every 12" of griddle width.
■ One embedded, mechanical snap action thermostat per burner for high performance and optimal response time.
■ Temperature adjust from 200° to 450°F.
■ One pilot safety valve for every two burners. Safety will completely shut off gas to pilot and burners if pilot extinguishes.
■ High capacity 41⁄2 quart capacity grease can.
■ 3⁄4" rear gas connection and convertible gas pressure regulator for LP service.
■ Constructed standard for natural gas service. LP conversion kit supplied with unit.
■ One year limited parts and labor warranty
36" w x 27" d x 16" h on 4" legs
Includes 3/4" x 48" Gas Line and Delivery in the GTA*
*Locations with special requirements (stairs, obsticles, etc.) may be subject to additional fees
STANDARD FEATURES
■ 1" thick polished steel griddle plate welded to 3 1⁄4" stainless steel back, tapered side splashes and stainless steel grease trough.
■ Fully welded stainless and aluminized steel chassis frame.
■ 12 1⁄2" cooking height on 4" adjustable legs.
■ One 25,000 BTU/hr. "U" shaped aluminized steel burner for every 12" of griddle width.
■ One embedded, mechanical snap action thermostat per burner for high performance and optimal response time.
■ Temperature adjust from 200° to 450°F.
■ One pilot safety valve for every two burners. Safety will completely shut off gas to pilot and burners if pilot extinguishes.
■ High capacity 4 1⁄2 quart capacity grease can.
■ 3⁄4" rear gas connection and convertible gas pressure regulator for LP service.
■ Constructed standard for natural gas service. LP conversion kit supplied with unit.
■ One year limited parts and labor warranty
STANDARD FEATURES
■ 1" thick polished steel griddle plate welded to 31⁄4" stainless steel back, tapered side splashes and stainless steel grease trough.
■ Fully welded stainless and aluminized steel chassis frame.
■ 121⁄2" cooking height on 4" adjustable legs.
■ One 25,000 BTU/hr. "U" shaped aluminized steel burner for every 12" of griddle width.
■ One infinite heat control valve per burner.
■ Standing pilot ignition system.
■ High capacity 41⁄2 quart capacity grease can.
■ 3⁄4" rear gas connection and convertible gas pressure regulator for LP service.
■ Constructed standard for natural gas service. LP conversion kit supplied with unit.
■ One year limited parts and labor warranty
Exterior Dimensions: 36" w x 27" d x 16" h on 4" legs
Includes 3/4" x 48" Gas Line and Delivery in the GTA*
*Locations with special requirements (stairs, obsticles, etc.) may be subject to additional fees
STANDARD FEATURES
■ 1" thick polished steel griddle plate welded to 31⁄4" stainless steel back, tapered side splashes and stainless steel grease trough.
■ Fully welded stainless and aluminized steel chassis frame.
■ 121⁄2" cooking height on 4" adjustable legs.
■ One 25,000 BTU/hr. "U" shaped aluminized steel burner for every 12" of griddle width.
■ One infinite heat control valve per burner.
■ Standing pilot ignition system.
■ High capacity 41⁄2 quart capacity grease can.
■ 3⁄4" rear gas connection and convertible gas pressure regulator for LP service.
■ Constructed standard for natural gas service. LP conversion kit supplied with unit.
■ One year limited parts and labor warranty
Exterior Dimensions: 24" w x 27" d x 16" h on 4" legs
Includes 3/4" x 48" Gas Line and Delivery in the GTA*
*Locations with special requirements (stairs, obsticles, etc.) may be subject to additional fees
STANDARD FEATURES
■ Stainless steel fry tank, 35-40, 45-50 and 65-70 lb capacities.
■ Large cold zone area.
■ 11⁄4" full port ball type drain valve.
■ Stainless steel reinforced door.
■ G90 high grade galvanized non corrosive finish sides and back.
■ Door liner for added stability.
■ Set of four nickel plated adjustable legs.
■ Twin fry baskets with plastic coated handles.
■ 90,000, 120,000 and 150,000 BTU’s/hr. input.
■ Behind the door snap action millivolt thermostat control adjusts from 200° to 400°F with standing pilot.
STANDARD FEATURES
■ Stainless steel front, sides, backriser, lift-off high shelf.
■ 6" Stainless steel adjustable legs.
■ 28,000 BTU/hr open top burners with lift-off heads.
■ Shrouded flash tube pilot system (one pilot per two burners).
■ 12" x 12" cast top grates with aeration bowls.
■ 30,000 BTU/hr standard oven cavity measures 26 3⁄4"w x 26"d x 18 3⁄4"h.
■ Oven thermostat adjusts from 250° to 500°F.
■ One oven rack and four rack positions.
■ 3⁄4" rear gas connection and gas pressure regulator.
■ One year limited parts and labor warranty
Exterior Dimensions: 36"w x 32"d x 58"h on 6" adjustable legs.
Price includes on-site delivery in the GTA*
*Locations with special requirements (stairs, obsticles, etc.) may be subject to additional fees
This is a used and refurbished Crown / SteamCan model GCX-10 natural gas, self contained steamer. The features of this model are listed as follows:
Type 304 stainless steel exterior with a #4 satin finish
Cooking chambers are one piece, all welded, type 316 stainless steel
13.9" W x 19.9" D x 17.4"H cooking compartment interior
Chambers are fully insulated and include removable stainless steel pan supports
Heavy duty door with a stainless steel liner and full perimeter gasket seal
Outer liner on door is one piece, all welded stainless steel with a positive lock and seal mechanism with spring release
Stainless steel drip trough integrally connected to the drain collects condensate when the doors are opened
Steam flow to the cooking chamber is cut off when the door is opened and reactivated when the door is closed
Standard boiler controls include: Automatic water level control, pressure gauge, water gauge glass, operating pressure control with pressure safety control, safety relief valve, and cathodic protector
Unit comes standard with a split water line
60 minute mechanical timer with alarm
Cabinet base w/ electric boiler is a full perimeter angled frame with reinforced boiler mountings
6" Stainless steel legs with adjustable bullet feet on the front and flanged rear feet for securing to the floor
ASME code stamped and National Board registered
AGA, CGA, and NSF certified
If you have any questions regarding this unit or any of our new or used restaurant equipment, please feel free to contact us.
This unit is not used but rather a demo unit that was run for about 2 weeks. The unit is complete and in full working order. The fridge has some very minor scratches but nothing that would be of any concern. The only reason it is being discounted is that it will come with a 30 day warranty rather than the 1yr that would come with a typical new unit. The cooler comes as shown with a shelf for each door and casters. The overall size of the cooler is 47.5" x 29.5" x 39.5", and will require only a standard 120V wall outlet for power. If you should have any questions about this or any other product, please feel free to contact us.